Zacuto Z-Finder Recoil Pro Rig for Sony BURANO

Perform handheld shots with your Sony BURANO in comfort and add accessories with this Z-Finder Recoil Pro Rig from Zacuto. This shoulder-mounted rig includes a VCT Pro baseplate, a top plate for the BURANO, left and right side rails, a tactical handle, and the Z-Finder EVF for the BURANO.

The baseplate features a V-wedge tripod mount with 1/4"-20 and 3/8"-16 threads, 1/4"-20 accessory threads, and 15mm LWS rod ports with removable/extendible 15mm rods. The top plate features multiple mounting threads, a NATO rail, and 15m rod ports. The side rails feature 1/4"-20 and 3/8"-16 accessory threads, as well as ARRI-style rosettes with a M6 thread. The tactical handle can be mounted onto the top plate using its NATO clamp, providing a comfortable wooden finger grip and a shoe mount. The Z-Finder replaces the Sony viewfinder and mounts right onto the camera's monitor to provide a viewfinder, magnification, and a clear image view.

With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

The Z-Finder for Sony BURANO from Zacuto is an optical viewfinder that uses 2.5x magnification to turn your camera's LCD monitor into a clear, easy-to-focus viewfinder. Designed specifically for use with the Sony BURANO, the Z-Finder features a flip-up design and a diopter wheel for focusing. It includes two extender frames for farsighted use and can be used with separately available drop-in diopters for further correction. This finder's large, lightproof eyecup also increases the stability of your handheld footage by adding a point of contact between the camera and your eye. A built-in aluminum sun mask on the Z-Finder protects your LCD screen from sunlight. One installed and one additional Anti-Fog disks keep your view clear in humid or cold environments.

WARNING: The Z-Finder is a magnifier, and as such will magnify the sun, which can damage the LCD screen if the sun is allowed to shine directly through the Z-Finder lens. Use the enclosed lens cap to block light from entering your Z-Finder when not in use.