Wooden Camera RED DIGITAL CINEMA DSMC2 Accessory Kit (Pro, 19mm)

Kit out your DSMC2 BRAIN, WEAPON, EPIC WEAPON, SCARLET WEAPON, or RAVEN with a professional array of shooting accessories with this 19mm RED DIGITAL CINEMA DSMC2 Accessory Kit from Wooden Camera. Included in the kit is an Easy Riser plate which has 1/4"-20 and 3/8"-16 mounting points on the bottom, provides 1/4"-20 holes on the side for attaching accessories, and also brings the camera up to correct lens height when using the included 19mm Unified Bridgeplate. The Unified Bridgeplate holds the two included 12"-long 19mm rods and attaches to the also included ARRI-standard 12" Safety Dovetail Plate.

On top of your camera, the included Pass-Through Top Plate provides a 26-pin LCD connection and a 3-pin interface for mounting the included Trigger Handle. The included 1/4"-20 to 1/4"-20 Ultra Arm Monitor Mount features a 3" extension connecting two double ball joint clamps, allowing for a monitor or accessory to be positioned in almost any orientation. On each side of the mount there are toolless 1/4"-20 screws with non-slip rubber pads to make accessory installation quick and easy. Lastly, the included A-Box plugs into the optional RED Base Expander Module and converts the 3.5mm microphone input into two XLR ports.

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

This 1/4"-20 to 1/4"-20 Ultra Arm Monitor Mount from Wooden Camera features a 3" extension connecting two double ball-joint clamps. A lever in the center of each clamp locks the joints on it, and the mounting points on the ends of the arm attach to your gear easily at the turn of integrated tightening knobs. Both ends feature rubber pads for more secure support.

The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end-points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and even a Preston mounting bracket. Additionally, the system is compatible with many 3rd-party 25mm ball mount systems.

The Wooden Camera Unified Bridgeplate (19mm)is an ARRI standard bridge plate with 19mm studio rods spaced 104mm center-to-center. It can be converted from RED standard height to ARRI standard height, making it compatible with any type of camera rig. The rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacing.