SHAPE Canon C70 Camera Cage Shoulder Rig

All Non-USD currency amounts shown are estimates, provided for general information purposes only. The final amount will be charged in US dollars.

The Canon C70 Camera Cage Shoulder Rig features SHAPE's push-button technology on the dual front handles and the top handle. The front handles adjust at two points on each side via the push buttons, and the top handle rotates a full 360°. The maple-lined top handle mounts securely on the top of the cage with multiple screws. A friction tilt bracket is included and can be attached to the shoe mount on the top handle to support a monitor up to 4.4 lb. Using an included Allen key, you can adjust the friction of the tilt bracket or fully tighten it into a locked position.

At the center of the rig is the Compact Revolt Shoulder Baseplate with rosette mounts, 8 and 4" 15mm rods, and a V-lock plate.

The C70 Camera Cage consists of three sides, leaving the camera's handgrip accessible. The top plate supports the native C70 top handle and mic holder, the latter via a built-in offset shoe mount. An included HDMI clamp attaches to the side of the cage.

The Canon C70 Camera Cage from SHAPE features a top, bottom, and left-side plate, leaving the right side open so the camera's handgrip can be used. The top plate supports the native C70 top handle and mic holder, the latter via a built-in offset shoe mount. An HDMI clamp is also included and attaches to the side to secure your HDMI cable.

The cage offers standard and anti-twist 1/4"-20 and 3/8"-16 accessory mounts all around, and multiple 1/4"-20 and 3/8"-16 tripod mount threads on the bottom. The bottom plate is rubber padded for safer attachment of your camera.

The SHAPE Compact Revolt Shoulder Baseplate is a lightweight baseplate suitable for use by neophytes and professionals alike. Made from CNC-machined aluminum, the baseplate is made to withstand the rigors of the production day. The shoulder pad allows it to sit comfortably on your shoulder. The top of the baseplate features two rubber strips to protect your camera. It incorporates two ARRI-compatible rosettes for attaching handle accessories. The top of the baseplate features a 3.5"-long slot that enables adjusting your camera's position for balance adjustments.

Front and rear 15mm LWS rod clamps enable you to mount the included 8 and 4" pairs of rods to support you lens accessories in front, and power/monitoring accessories in the rear. An included 3mm Allen Key allows you to adjust the rod clamps, and the rear rod clamp is removable and attaches to the Revolt Shoulder Baseplate by two M4 screws. On the bottom of the baseplate is a V-lock plate that is compatible with most VCT baseplates. The V-lock plate has both a 1/4"-20 and 3/8"-16 threaded mounting hole.