SHAPE Baseplate and Articulating Handle for Sony FX6

Add a shoulder mount to your Sony FX6 camera with this Baseplate with Articulating Handle from SHAPE. The kit includes a lightweight aluminum VCT baseplate and an articulating push-button handle with a rubber handgrip.

The VCT baseplate incorporates two ARRI-compatible rosettes for attaching optional handgrips and accessories, features 1/4"-20 and 3/8"-16 camera mounting screws, and is VCT-14 quick release compatible. Its sliding shoulder pad plate allows you to optimally position your camera on your shoulder or rig. The articulating handle features a comfortable rubber handgrip and mounts onto one of the rosettes on the baseplate, and it can be adjusted with the press of a button. The front and rear 15mm LWS rod clamps enable you to mount the included 8 and 4" pairs of rods to support accessories in front and the rear.

Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

This pair of 15mm Aluminum Rods from SHAPEconnects to your camera rig, extending it and letting you add compatible accessories. With these two rods and a few fundamental accessories, you can begin building your own rig from scratch.

This pair of 15mm Aluminum Rods from SHAPEconnects to your camera rig, extending it and letting you add compatible accessories. With these two rods and a few fundamental accessories, you can begin building your own rig from scratch.

The Single Quick Handle with Double ARRI Rosette from SHAPE features SHAPE's quick-lock button technology. The handle can rotate on a 360° axis. The handle and arm can be rotated by pushing the red button. Once the button is released, the handle is secured firmly in place.