Sennheiser MEG 14-40-L-II Gooseneck Microphone & MAT 153-S Table Stand Kit

Set the scene for clearly structured meetings and discussions with the MEG 14-40-L-II Gooseneck Microphone & MAT 153-S Table Stand Kit from Sennheiser. With a clearly visible green LED ring on the gooseneck and a prominent mic button on the stand, this kit is intuitive and easy to operate. The mic uses a KE10 capsule to maximize speech intelligibility.

Set the scene for clearly structured meetings and discussions with the MEG 14-40-L-II Gooseneck Microphone & MAT 153-S Table Stand Kit from Sennheiser. With a clearly visible green LED ring on the gooseneck and a prominent mic button on the stand, this kit is intuitive and easy to operate. The mic uses a KE10 capsule to maximize speech intelligibility.

Powered by a single 3-pin XLR cable (available separately), this kit integrates into your setup in a snap. A TTL logic output on the bottom of the table stand can be used to activate a camera or media control system.

The black MAT 153-S Table Stand from Sennheiser is a sturdy, wired table stand that provides a stable base for 5-pin XLR gooseneck microphones. It has a user-friendly microphone button with a two-color status display that provides quick visual feedback on whether the microphone is active or muted. The TTL logic output on the underside can be used to activate a camera or media control system. The table stand is powered via a separately available 3-pin XLR cable.

The Sennheiser MEG 14-40-L-IIis a 15.7” gooseneck microphone designed to provide intelligible speech reproduction for lectures, conferences, meetings, and houses of worship. It features an XLR 5-pin connector, which carries power for its green light ring and audio signal to a preamp. The green light ring indicates when the speaker can take the floor.

Its KE 10 capsule features a directional cardioid polar pattern and yields a frequency response of 50 Hz to 20 kHz. RF shielding protects against interference from wireless devices, giving you a cleaner signal. The flexible 15.7” gooseneck allows precise placement in front of the spokesperson. No batteries are needed to power the MEG 14-40-L-II, it operates on 12 to 48V phantom power.

Logic: Clip Contact for Logic In (External LED Control), Ground, and Logic Out (Switch Signal) Current Consumption 3.7 mA Input/Output Voltage Logic Out: High-Level Output Voltage >2.4 V, Low-Level Output Voltage <0.4 V

Logic In: High-Level Input Voltage >2.0 V, Low-Level Input Voltage <0.8 V LED Status Indicator Light Ring: Red/Green Dimensions Not Specified by Manufacturer Weight Not Specified by Manufacturer