MXL 990 Complete Large-Diaphragm Cardioid Condenser Microphone Bundle with SMP-1 and XLR Cable (Champagne)

The MXL 990 Complete Bundle conveniently adds an SMP-1 combination shockmount and pop filter along with a 20' XLR cable to this workhorse condenser microphone to create a vocal-ready recording package for home and project studios.

Styled in a champagne finish, the MXL 990 is a large-diaphragm condenser mic made to give home-based producers, musicians, and vocalists a cool, vintage-looking mic that sounds good and sits comfortably below the triple-digit price point. It includes a vibration-absorbing shockmount and a space-saving stand adapter, allowing professional and flexible mic placement. Plus, the supplied carrying case is perfect for safely transporting the mic and its accessories to a different recording location.

Inside the vintage-style body are quality components—a 6-micron, gold-sputtered diaphragm and an FET preamp with a balanced output. These allow the MXL 990 to impart tight lows and mids along with sweet highs. The mic's directional response helps reduce the background noise that plagues many home recordings. Unlike battery-powered miniature mics, the MXL 990 needs to be plugged into the XLR mic input of any audio interface, mixing board, or microphone preamp that can supply 48V phantom power.

With silky highs and solid lows and midrange, the MXL 990 offers the tonal performance needed to meet the standards of analog and digital recording systems. Equally capable for vocals and instruments like piano and acoustic guitar, the MXL 990 produces full-bandwidth tone and a healthy output level that requires less gain than typical dynamic microphones.

Many home recording setups don't have the acoustic treatment that professional studios utilize to absorb and disperse sound evenly. As a result, room ambience and background noise are problems commonly experienced at home. The MXL 990 has a cardioid polar pattern, which picks up very little sound behind the mic. This enables it to capture more of the sound in front of it and less of everything else.

As a condenser mic with a FET preamp, the MXL 990 requires phantom power to operate in any environment. So, it should be connected via an XLR cable (available separately) to a mixing board, a microphone preamp, or an audio interface that can send +48V phantom power.

• Side-address design with vintage body style
• Condenser capsule with a 6-micron, gold-sputtered diaphragm
• Cardioid polar pattern attenuates ambience and background noise
• High sensitivity and full frequency response (30 Hz to 20 kHz)
• FET preamp with balanced output
• Internally wired with Mogami
• XLR output connector
• Requires 48V phantom power
• Includes custom shockmount, mic stand adapter, and carrying case

The SMP-1 Shockmount with built-in metal pop filter is designed for the MXL 770 and 990 microphones. It can be used to eliminate vibrations and prevent vocal plosives during recording applications. In addition, it protects the mic from corrosive moisture.