Authorized Dealer
Confidently secure your data with the 256GB datAshur SD USB-C 3.2 Gen 1 Encrypted Flash Drive from iStorage. This PIN-authenticated, hardware-encrypted, flash drive uses removable iStorage microSD cards and it protects…
Product highlights and buying context
Confidently secure your data with the 256GB datAshur SD USB-C 3.2 Gen 1 Encrypted Flash Drive from iStorage. This PIN-authenticated, hardware-encrypted, flash drive uses removable iStorage microSD cards and it protects your data with keylogger and brute force protection, AES-XTS 256-bit hardware encryption, auto-lock, and a tough epoxy resin that covers the internals. In order to authenticate and use the datAshur SD as a normal flash drive, an 8-64 digit PIN must be entered on the built-in keypad.
The datAshur SD features a USB 3.2 Gen 1 Type-C connector that has a read speed of up to 100 MB/s and a write speed of up to 95 MB/s. The IP68 water- and dust-resistant rating boosts this drive's durability and security. Additionally, this drive is FIPS 140-3 level 3 compliant and boasts a common criteria EAL5+ certified secure microprocessor that further ensures the protection of your data. No software, drivers, or specific operating systems need to be installed for this device to be fully functional, as it works on any device with a USB port.
Insert your iStorage microSD Card into the datAshur SD's microSD card slot and simply enter your 8-64 digit PIN to authenticate and use it as a normal flash drive. When the drive is locked, all data on the iStorage microSD card is encrypted (full disk encryption) using AES-XTS 256-bit hardware encryption (no software required).
All data stored on the datAshur SD is encrypted using FIPS PUB 197 validated, AES-XTS 256-bit hardware encryption. All components incorporated within the datAshur SD are completely covered by a layer of super tough epoxy resin, which is virtually impossible to remove without causing permanent damage to the components. The drive is also designed to be tamper-evident making it obvious to the User if it has been pried open and tampered with.
The onboard keypad has a polymer coating that protects the keys and hides key usage to avoid tipping off a potential hacker to commonly used keys.
The datAshur SD is extremely rugged, surviving a drop of up to 4m onto a concrete surface. The crush-proof drive can withstand the weight of a 2.7 ton vehicle.
The drive's IP68 accreditation means it will survive being submerged under 1.5m of water for 30 minutes and deemed fit enough to withstand dust, dirt, and sand.
This makes it perfect for corporate and government deployment. If the User forgets their PIN, the drive can be unlocked using the Admin PIN. The Administrator can then allow the User to set a new User PIN.
The Admin can set a restriction policy for the User PIN. This includes setting the minimum length of the PIN, as well as requiring the input of one or more special characters.
Offers ultimate security against hackers, detecting and responding to tampering with features such as:
Both Admin and User can configure the datAshur SD as a read-only (write protected) device. If configured by the Admin, the feature cannot be modified or disabled by the User, allowing the Admin to pre-provision a device with pre-loaded content as a read-only drive for the User.
Ideal in certain cases where the datAshur SD needs to remain unlocked during USB port re-enumeration, such as during a reboot process or passing the device through a virtual machine. Allows users to install an OS on the datAshur SD and boot directly from it.
If the User PIN is entered incorrectly 10 consecutive times, the User PIN will be deleted and the drive can only be accessed by either activating the User recovery PIN (if configured) or entering the Admin PIN. Additionally, if the Admin PIN is entered incorrectly 10 consecutive times, all data, PINs, and the encrypted encryption key will be lost forever.
Additional Details
Loading…