ikan Onyx Half x 1 Bi-Color 3-Point LED Light Kit

ikan has put together the Onyx Half x 1 Bi-Color 3-Point LED Light Kit to give image makers the benefit of a 3-light setup built around a fixture with variable color, variable light intensity, and multi-voltage AC or battery power options. The kit includes 3 Onyx Half x 1 Bi-Color LED Panels. Each light has a yoke, AC adapter, car adapter, two L-series batteries, a dual battery charger, and a light stand. A stand bag is included for the light stands and a separate bag is provided for the lights.

The Onyx 240 Bi-Color On-Camera LED Light from ikan has an output of roughly 250W at full power, yet draws only 30W. It is a bi-color light that enables you to adjust the color temperature of the fixture's output from 3200 to 5600K and features a CRI of 95 and TLCI of 96 in both Tungsten and Daylight. Power on/off, dimming, and color temperature are controlled from the back of the fixture via four buttons. A two-digit LED screen is shared for dimming and color temp, with an indicator light informing you of which characteristic you are controlling.

The fixture requires two L-series batteries, and ships with two batteries that are the equivalent of a 550 L-series battery and a dual battery charger. You can also power the fixture from an optional AC power supply that outputs 13 to 17 VDC. The built-in diffusion helps prevent the effect of multiple cast shadows that afflict some LED array-type lights. A built-in 1/4"-20 threaded mounting hole, and the included cold shoe adapter enable mounting the fixture on your camera. Also included are a removable handle and removable light stand adapter, which mount via the 1/4"-20 threaded mounting hole.

The M button enables switching between dimming and color temperature. An LED indicator lights up to indicate which characteristic of the fixture you are controlling. A two digit display screen indicates dimming from 10 to 99% and color temperature from 32 to 56.

The fixture has two slots for L-Series type batteries, as well as a coaxial port for power from an optional AC adapter. When powering from batteries, you must use two batteries to power the fixture, it does not work with only one battery.

The V2 Heavy Duty Light Stand from ikan is a two-riser, three-section, air-cushioned support that rises to a height of 8' and folds down to 36". The stand supports up to 8 lb and has a 5/8" top stud.

This AC Adapter is compatible with the ikan Onyx 240 bicolor on-camera LED light. It features a 15V, 2.4A output and a 2-prong U.S. wall plug.

The IBG-STND Stand Bag by ikan is a robust storage and transport carry case made of strong, black synthetic material intended for ikan ID500 and ID1000 light stands. The bag features a padded interior with individual compartments for each stand and zippered closures on both the top and side. A webbed strap encircles and reinforces the bag and its 2 handles join together with a padded touch-fastener.