Authorized Dealer
Display your UHD 4K source video to a video wall with up to four Full HD outputs with this UHD 4K 600 MHz 1x4 Video Wall Controller from Gefen. This controller supports up to UHD 4K60 HDMI input and four 1080p HDMI…
Product highlights and buying context
Display your UHD 4K source video to a video wall with up to four Full HD outputs with this UHD 4K 600 MHz 1x4 Video Wall Controller from Gefen. This controller supports up to UHD 4K60 HDMI input and four 1080p HDMI outputs, and it also features HDCP support. The unit can also de-embed the HDMI input audio into analog RCA stereo outputs for use with separate speaker systems.
The controller settings are accessed by an RJ45 port over IP using the unit's web server, and it can also be configured via Telnet. The RS-232 DB-9 port can be used to plug in an automation control device that uses command line tools for configuration. The front-panel buttons allow you to control the menus and settings, or you can use the included IR remote controller to operate the system. If your remote is out of the line of sight, an IR extender module is included which plugs into the 3.5mm IR port to extend the signal.
The firmware is updated via the mini-USB port using the downloadable Gefen Syner-G software suite. Also included with the controller are 1 RU ears for rack mounting, a 6' locking HDMI cable, a 6' DB-9 cable, and a 12 VDC power supply.
Video Wall Controller divides an input signal up to UHD 4K into four separate signals up to 1080p60 to be scaled and sized for each output
Controllable via front-panel controls, IR remote, IP web server interface, Telnet, and RS-232
Input resolutions up to UHD 4K60 4:4:4 with HDCP 2.2; output resolutions up to 1080p60
Handheld IR remote control for line-of-sight control, and 3.5mm IR input on back panel to connect the included EXT-RMT-EXTIRN IR extender module if additional IR range is needed
Custom layout can be setup for special monitor arrangements that go beyond the usual preset layouts
Additional Details
Loading…
