E-Image 2-Stage Aluminum Tripod, Fluid Head, and Dolly Kit (15.4 lb Payload)

This 2-Stage Aluminum Tripod, Fluid Head, and Dolly Kit from E-Image includes the GA752 aluminum tripod legs, the GH05 75mm fluid video head, a GP1 tripod plate, two GB2 pan handles, and the EI-7003B heavy-duty floor dolly with cable guards. The aluminum legs incorporate E-Image's Mono-Lock design that allows you to adjust the leg height using the single locking lever at the top of each leg.

The fluid head mounts into the 75mm bowl and supports loads up to 15.4 lb. The dolly supports up to 88.2 lb and provides a smooth glide on a studio floor. Cable guards protect the wheels from getting caught on the cables.

GH05 Fluid Head

The GH05 fluid video head has a maximum payload of 15.4 lb and includes two GB2 pan handles and a GP1 quick release plate, and it fits into a 75mm bowl. Pan and tilt drag are installed and fixed, and the counterbalance can be set to one of three different levels (0-2) via the dial on the back of the head. The head features two rosettes for mounting the included pan handles simultaneously for extra control.

GA752 Aluminum Tripod Legs

The GA752 video tripod legs can support up to 88 lb and utilize a convenient mono-lock system that allows you to lock and unlock both stages of each extendable leg with one motion. The GA752 features a 75mm bowl for quickly adjusting the payload horizontally and/or vertically.

Heavy-Duty Dolly

The E-Image heavy-duty dolly supports up to 88.2 lb and is ideal for moving tripods along a flat surface for quick repositioning between shots. This dolly is perfect for both studio and on-location use where support for heavy setups is a requirement. When adjusted correctly, the cable guards will push away cables that are in the way when moving the dolly.